Mede8er MED450X2 User Manual download pdf (Page 9)

Page8

FORMATTING THE HARD DRIVE

The MED450X2 has a built in Hard Drive format feature that formats the hard drive with a main NTFS

partition and other small internal partitions for propriety use.

The Hard Drive should be formatted in the Mede8er MED450X2 to ensure full functionality. A pre formatted

Hard Drive can be used but you may not be able to use all the internal features of the MED450X2.

To Format the internal Hard Drive select SETUP menu and then HDD Format. The Hard Drive format

function can be protected by the built in “Pin Code Lock” function. To enable Hard Drive Format protection

just enable “Pin Protection” option in the Setup menu.

WARNING: FORMATTING THE HARD DRIVE WILL ERASE ALL DATA

Formatting ...

USB CONNECTION TO PC

You can transfer files to and from the Mede8er via fast USB2.0 or USB3.0 transfer. Use the included Blue

USB cable to connect the Mede8er MED450X2 to your PC. After you have connected the USB cable press

the on/off button on the MED450X2 front panel and the LED will go “off’. The Mede8er drive Dialogue

Screen will open on your PC. The Computer will automatically install the correct drivers and then you will

be able to navigate the Mede8er like any normal external USB drive. Note: Some Computers may take up

to a few minutes to install the correct USB drivers. If you cannot connect to the Mede8er than try another

USB Port on your computer.

EXTERNAL USB DEVICE DRIVER NOT REQUIRED

IMPORTANT: USE THE SUPPLIED BLUE USB3.0 CABLE

FOR USB CONNECTION TO YOUR PC

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 39 40

No comments

Mede8er MED450X2 User Manual Page 9